News

Home > News > Content
Cylinders Must Be Placed Upright
Aug 29, 2017

Generally speaking, because the cylinder application in our life is very common, this is a professional storage equipment, mainly for high-pressure oxygen, gas, liquefied petroleum gas and so on. The safe storage of cylinders and the transport of gas cylinders are generally in the attire of permanent gas, liquefied gas or mixed gases. Steel Cylinders So what are the specific storage requirements?

What are the storage requirements for cylinders:

① should be placed in a dedicated warehouse storage, must comply with the state dangerous goods storage regulations, Steel Cylinders the gas bottle warehouse should be in line with the building design fire Code of the relevant provisions, must be equipped with professional knowledge of the technical personnel, its warehouse and the site should be staffed management, equipped with reliable personal safety protection supplies, and set

No trench in ② Warehouse, no open fire and other heat sources shall be ventilated, dry, and protected from direct sunlight; storage warehouses and storage rooms should have good ventilation, Steel Cylinders cooling and other facilities, not have trench, tunnel and bottom vent, and prohibit any pipeline through, should avoid direct sunlight, avoid radioactive radiation sources. The cylinder body should be dried. Summer should be prevented from exposure.

③ In addition, in the case of a gas cylinder which is easy to act as a polymerization reaction or a decomposition reaction gas, the maximum temperature in the warehouse must be controlled according to the nature of the gas.

In addition, Steel Cylinders in order to ensure the safety of the use of cylinders, empty bottles and real bottles should be placed separately, and there are obvious signs, toxic gas cylinders and cylinders in contact with the gas can cause combustion, explosion, the production of toxic gas cylinders, Steel Cylinders should be stored in the compartment, and in the vicinity of the installation of anti-virus It must be stored in isolation from explosive articles, oxidants, flammable articles, inflammable articles and corrosive articles.

Although the cylinders are easy to use, they also have unsafe risks. In case of pipeline leakage or valve is not tight, gas to the indoor diffusion, when the content reached the explosion limit, Steel Cylinders encounter Mars or sparks will explode. So what problems should we pay attention to in the daily use of cylinders?

① should be used in a separate brick-and-tile kitchen to properly place liquefied petroleum gas (LPG) equipment.

② cylinders must be placed upright and not allowed to lie or lay down. Must be diligent inspection, fine observation, find the problem timely treatment. To protect safety please close the cylinder angle valve before you go to bed.

③ cylinders must be away from the heat source, Steel Cylinders placed in easy to move, around no flammable, more ventilated place, the stove, bottle distance above 80 centimeters, not in any form to the cylinder heating.

④ installed before the valve to check the sealed rubber band, do not have variant, defect, installed pressure valve handwheel to the valve mouth, Steel Cylinders counterclockwise rotation to tighten.

⑤ rubber HOSE, cooker switch, pressure reducing valve and hand wheel to the cylinder valves connection part is more easy to leak, check the leak please use soapy water brushing inspection parts, do not use the fire to check the leak. In the event of a fire to cut off the gas source as soon as possible (close the bottle valve), do not put the bottle, and timely report to the fire.

⑥ No unauthorized demolition, conversion of liquefied petroleum gas special equipment, there are problems please supply units to deal with. Steel Cylinders The leakage of liquefied petroleum gas should be timely closed the bottle valve, open doors and windows, ventilation evacuation. In the leaking site, all types of open flames (including cigarette butts) are prohibited from opening, closing all types of electrical equipment.

In order to remind people of the leakage of liquefied gas in time to prevent accidental occurrence, processing plants in the factory before the gas often mixed with a small amount of odor of mercaptan or sulfur ether compounds. Once the liquefied gas leaks, smell the odor immediately. and take emergency measures.





Copyright © Shenyang Gas Cylinder Safety Technology Co.,Ltd All Rights Reserved.Tel: +86-24-8972-5107